Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Aprilia GP 800

Model: Gilera Gp 800
Part: Service warning light

Video tutorial

In this short video, we will discover how to reset the service light for regular maintenance of the oil change on an Aprilia GP 800 scooter. First, press and hold the "set" button found on the instrument panel; then turn the key to switch on the panel while still holding the set button, and you will see the service light, along with the belt light, start to flash.

At this point, press the clock button to decide which of the two you want to reset; press the clock button again to definitively reset the service light!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Remove the Variator, Belt, and Clutch on a Gilera GP 800
How to Remove the Variator, Belt, and Clutch on a Gilera GP 800
Gp 800 In this video, see how to remove the variator and the drive belt on a Gilera GP 800 scooter. First, unscrew the screws of the clutch cover using a 27…
How to Replace the Exhaust on a Gilera GP 800?
How to Replace the Exhaust on a Gilera GP 800?
Gp 800 You can replace the exhaust installed on the Gilera GP 800 by loosening the screws that secure the exhaust terminal to its housing, located near the …
How to Replace the Variator on the Gilera GP 800?
How to Replace the Variator on the Gilera GP 800?
Gp 800 To replace the variator on the Gilera GP 800, loosen the screws securing the cover located on the left side of the motorcycle to gain access to the c…

How to Replace the Rear Brake Pads on a Benelli TRK 502X?

To replace the rear brake pads on a Benelli TRK 502X, loosen the screws that secure the corresponding caliper so that it can be detached from the brake disc: once the caliper is removed from its disc, you can proceed to detach it and remove the pin that secures the pads inside the caliper. At this point, you can remove the old pads from their seat to insert the new ones: these must be secured properly by positioning the caliper and checking that the brake is functioning.

Watch the video!


by ScegliAuto

More videos