Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the oil and oil filter on the Gilera Runner VX 125, warm up the bike to make the oil more fluid. Then, open the drain plug using a 24mm spanner and position a container underneath to collect the used oil. With the same spanner, loosen the oil filter and remove the mesh filter: this should be cleaned with a blast of compressed air. Once cleaned, it can be reinserted, and the new oil filter can be fitted. Finally, top up the oil through the cap located on the opposite side.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change Engine Oil on Gilera Runner VX 125 (2007)
How to Change Engine Oil on Gilera Runner VX 125 (2007)
Runner Vx 125 Let’s see how to change the engine oil during the regular maintenance service on a Gilera Runner VX 125 scooter, in simple and quick steps. First, wa…
How to Replace the Headlight Bulb on a Gilera Runner VXR 125
How to Replace the Headlight Bulb on a Gilera Runner VXR 125
Runner Vx 125 Watch this video to learn how to dismantle and replace the headlight bulb on a Gilera Runner VXR 125 scooter in simple and quick steps. First, unscre…
How to Replace the Air Filter on the Gilera Runner VX125 Scooter?
How to Replace the Air Filter on the Gilera Runner VX125 Scooter?
Runner Vx 125 As shown in this tutorial, replacing the air filter on the Gilera Runner VX125 scooter is an extremely simple and quick task. First, ensure that the …

How to Replace the Front Bulb on the Honda SH 125

This tutorial explains the steps to replace the front headlamp bulb on the Honda SH 125. This is a very simple procedure. First, remove the front shield of the scooter to access the bulb replacement. To perform this first step, unscrew the lower screw and the two upper screws that secure the cover. At this point, the bulb will be clearly visible. Simply unscrew the bulb and insert a new one. It is recommended to carry out this procedure after ensuring that the bulb to be removed has cooled down.

Watch the video!


by ScegliAuto

More videos