Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Model: Gilera Runner 50
Part: Headlight

In order to remove the headlight of the Gilera Runner 50 you have to unscrew the screws that fix the central panel placed in correspondence with the front fairing of the bike; once this has been removed, it will be possible to access the screws below that secure the headlight inside its housing. Furthermore, it will be necessary to unscrew one last screw located in the lower part of the headlight, in the internal seat of the wheel arch. In this way the light can be removed from inside its housing and disconnected from its connector; by doing so, the new lighthouse can be connected and properly fixed.


Posted on 29 May 2024 by ScegliAuto



How do you replace the stator of the Gilera Runner 50?
Runner 50 To replace the stator of the Gilera Runner 50, you need to loosen the screws that secure the circular cover panel located on the right side of the bi
How do you replace the Gilera Runner 50 transmission?
Runner 50 The transmission replacement operation on the Gilera Runner 50 is carried out by loosening the screws that fix the casing on the left side of the rea
How to disassemble the carburetor on Gilera Runner SP 50
Runner 50 Let's see in this short video how to disassemble the carburetor on a Gilera Runner SP 50 scooter, in simple steps. First of all, we are going to remo

How to change the motor oil of a KTM Duke 390?

To change the motor oil on a KTM Duke 390, start by placing the motorcycle on a stable stand to ensure it is in a vertical position. Under the engine, locate the oil drain plug and remove it with the appropriate wrench, allowing the used oil to completely drain into a suitable container. Once the oil has completely drained, screw the drain plug back on and tighten it properly. Next, locate the oil fill opening on the engine and fill it with the recommended new oil, using a funnel to prevent spills. Check the oil level to make sure it is correct, adding more oil if necessary. After completing the filling, start the engine and let it run for a few minutes to distribute the new oil. Finally, turn off the engine and check the oil level again, adding more if needed.

Watch the video!


by ScegliAuto

More videos