|
Do it yourself
| |||
| ||||
|
Model: Gilera Runner 180
To replace the frame bushes on a Gilera Runner 180, you need to completely remove the side fairings of the bike, located near the underseat compartment and the footrest area. This will allow access to the underlying components, and you can loosen the bolts securing the bushes at the beginning of the exhaust. After removing the old replacement parts, you can install the new ones and secure them properly; finally, reattach the side fairings of the bike.
Updated on 2 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Runner 180
You can dismantle the engine of the Gilera Runner 180 by loosening the screws that secure it to its housing, located at the central lower part of the…
Runner 180
In this guide, we will see the main instructions on how to disassemble and replace the drive belt and the radiator on a Gilera Runner 180. First, pla…
Runner 180
To replace the belt on a Gilera Runner 180, you will need to loosen the screws securing the transmission cover located near the rear wheel, on its le…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
