|
Do it yourself
| |||
| ||||
Model: Gilera Gp 800
To replace the coolant on the Gilera GP 800, you need to loosen the fastening ring connected to the bottom of the radiator: once the appropriate hose has been disconnected, you can collect all the fluid in a suitably positioned container. After all the fluid has drained out, reconnect the cap and top up: this should be done by adding the necessary amount of fluid through the bleed located on the upper side of the radiator, then check that everything is functioning correctly.
Updated on 19 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Gp 800
In order to replace the variator of the Gilera GP 800, you need to loosen the screws that fix the transmission case, located near the rear wheel on t…
Gp 800
Today we will look at the instructions that will allow us to remove and replace the variator of the Gilera GP 800 scooter in simple and quick steps. …
Gp 800
To replace the variator on the Gilera GP 800, loosen the screws securing the cover located on the left side of the motorcycle to gain access to the c…
|
How to Replace the Headlight Bulbs on the KTM RC 200?
As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.158
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |