|
Do it yourself
| |||
| ||||
Model: Gilera Gp 800
To replace the sprocket on the Gilera GP 800, access the right side of the engine block: here, you will find the protective cover, which must be removed from its housing by loosening the screws that secure it. Under this cover, you will find the sprocket, which can be removed from its housing by loosening the central nut that secures it in place; once the old sprocket has been removed, you can install the new replacement part to ensure everything is functioning correctly.
Updated on 13 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Gp 800
Here are the instructions to remove and replace the sprocket and crown on the Gilera GP 800 scooter. First, place your scooter on the centre stand an…
Gp 800
You can replace the front brake pads on a Gilera GP 800 by loosening the screws that secure the caliper to the corresponding disc: once the caliper i…
Gp 800
To replace the variator on the Gilera GP 800, loosen the screws securing the cover located on the left side of the motorcycle to gain access to the c…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.114
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |