Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gilera Runner 50
Part:

In order to remove the fuel tank of the Gilera Runner 50, it is necessary to remove all the panels that form the front fairing of the motorcycle, so that it is possible to access the underlying parts: to remove these panels, it will be necessary to loosen the screws and unhook the clips underneath. Once the panels have been removed, the tank can be located on the bottom left: it will need to be freed from its housing by loosening the fixing screws and disconnecting various pipes and connectors. The new replacement part can then be connected and secured, making sure that everything works correctly.

Posted on 9 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fuel Tank Float on a Gilera Runner 50
Replacing the Fuel Tank Float on a Gilera Runner 50
Runner 50 This guide outlines the main steps to remove and replace the fuel tank float on a Gilera Runner 50 scooter. First, place the scooter on the centre st…
How do you replace the stator of the Gilera Runner 50?
How do you replace the stator of the Gilera Runner 50?
Runner 50 To replace the stator of the Gilera Runner 50, you need to loosen the screws that secure the circular cover panel located on the right side of the bi…
How to Replace the Instrument Cluster on a Gilera Runner 50
How to Replace the Instrument Cluster on a Gilera Runner 50
Runner 50 To replace the instrument cluster on a Gilera Runner 50, loosen the screws that secure the front panel of the bike. Once the panel is released, you c…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos