|
Do it yourself
| |||
| ||||
How to Program a GMC Savana Ignition Key
Model: GMC Savana
MK 2
- Years:
2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
To program a new ignition key for your vehicle, follow these steps: First, get a new key and a stopwatch. Insert the new key into the ignition and turn on the power. Start the stopwatch and wait for 10 minutes. During this time, a yellow light with a lock symbol will be illuminated on the dashboard. After 10 minutes, the light will turn off. Repeat the same procedure, waiting another 10 minutes, after which the light will turn off again. Finally, repeat the cycle for a third time, and at the end of this cycle, the light will turn off permanently, and the key will be programmed.
Updated on 18 May 2026 by ScegliAuto
Related tutorials
GMC Savana
(1996-2002 /
MK 1)
Thanks to the very simple and minimalist design of your GMC Savana key, replacing the battery inside is particularly easy and quick. Below, you will …
GMC Savana
(2003-2024 /
MK 2)
In this tutorial, you will see how to reset the oil service light on a GMC Savana, a very simple and quick operation to perform only after completing…
GMC Savana
(2003-2024 /
MK 2)
To replace the button battery in your GMC Savana Mk2 key, you only need a few seconds and a flathead screwdriver. Here are the steps required. First,…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.083
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |