Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Door Panel of the Great Wall H6

Model: Great Wall Steed MK 1 - Years 2006-2023
Part: Door trim panel

Removing the door panel of the Great Wall H6? Remove the front panel of the car following the guide. Remove the cover of the handle located inside. Unscrew the screws in the space of the upper door opening lever and the screws present in the handle. Remove the inner handle, unscrew the remaining screws on the door panel and detach the securing clips. Pull the panel away with your hands and disconnect it from the door (disconnect the power wiring and the opening cable). Perform the desired maintenance inside the door or install a new cover panel.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Great Wall Steed (2006-2023 / MK 1) In this video, we will see how to find the color code on the Great Wall Steed: an interesting thing we can say about this vehicle is that it is also …
Great Wall Steed (2006-2023 / MK 1) In this video, you will learn how to fit the tarpaulin on the Great Wall Steed. Use a tape measure to take a fixed measurement of 4 inches around the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos