Do it yourself
| ||||
|
Great Wall Steed - Video tutorial
Model: Great Wall Steed
MK 1
- Years 2006-2023 To reset the Service light on the Greatwall Steed, you need to press and hold the button located on the instrument panel, which is used to reset the trip odometer. This button should be held down while the instrument panel is off. Then, while still holding it down, you can insert the ignition key into the appropriate slot and turn it to start the instrument panel. You must continue to hold the button until the light is properly reset. After the reset, you can release the button and turn off the instrument panel.
Posted on 17 September 2023 by ScegliAuto
Other guides that may interest you |
How to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |