Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Great Wall
  4. :
  5. Great Wall H6
  6. : How do you replace the battery of the Great Wall H6 remote control?

Great Wall Great Wall H6 - Video tutorial

Model: Great Wall Great Wall H6 MK 1 - Years 2011-2016
Part: Key
Operation: How do you replace the battery of the Great Wall H6 remote control?

In order to replace the battery of the Great Wall H6 remote control, you need to press the button located on the back of the device, so that it is possible to remove the key from the top. Once the key has been removed, you can lever inside its housing to open the two halves of the remote control shell: the battery inside can now be removed to be replaced with a new one. After the replacement, you can reassemble the remote control and then insert the key to verify that everything is functioning properly.


Posted on 4 February 2024 by ScegliAuto

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos