Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Great Wall H6

Model: Great Wall Great Wall H6 MK 1 - Years 2011-2016
Part: Warning light – error code

Performing a forced reset on a 2021 Great Wall H6 is a very simple operation that can be done independently, aided by this short video tutorial. It is important to note that this operation should only be performed once and in specific cases. Under normal circumstances, it is advisable to visit a garage for a check-up. The first step is to enter the vehicle and sit in the driver's seat. Then, start the engine and turn it off after 20 seconds. Next, you need to turn the car on and off about 5 times; this will complete the reset.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote battery on the Great Wall H6?
Great Wall Great Wall H6 (2011-2016 / MK 1) To replace the remote battery on the Great Wall H6, press the button located on the back of the device to extract the key from the top. Once the key …
How to Replace the Cabin Filter in the Great Wall H6?
How to Replace the Cabin Filter in the Great Wall H6?
Great Wall Great Wall H6 (2011-2016 / MK 1) In this tutorial, you will see how to replace the cabin filter in the Great Wall H6, a very simple and quick operation. First, go inside the cabin, t…
How to reset the service light on the Great Wall
How to reset the service light on the Great Wall
Great Wall Great Wall H6 (2020-2026 / MK 3) Today we will explain how to reset the service light on a Great Wall vehicle. To reset the light, we need to turn on the instrument panel and connect…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos