Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Can you make a ramp to lift a Great Wall vehicle?

Model: Great Wall Great Wall H6 MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

Everyone has, at least once in their life, needed to lift their vehicle for a check or to carry out a job. Whether it’s a Great Wall car or any other, the idea proposed in this video is really interesting, economical, and very simple to execute. Essentially, the protagonist shows how to use simple wood to complete the job quickly.

It will be enough to measure the width of the tyres, cut the various pieces of wood to size, assemble them with screws in the holes made with a rechargeable drill, and finally, to facilitate transport, make them foldable using metal hinges.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in the Great Wall H6?
How to Replace the Cabin Filter in the Great Wall H6?
Great Wall Great Wall H6 (2011-2016 / MK 1) In this tutorial, you will see how to replace the cabin filter in the Great Wall H6, a very simple and quick operation. First, go inside the cabin, t…
How to Reset the Great Wall H6
How to Reset the Great Wall H6
Great Wall Great Wall H6 (2011-2016 / MK 1) Performing a forced reset on a 2021 Great Wall H6 is a very simple operation that can be done independently, aided by this short video tutorial. It i…
How to replace the remote battery on the Great Wall H6?
Great Wall Great Wall H6 (2011-2016 / MK 1) To replace the remote battery on the Great Wall H6, press the button located on the back of the device to extract the key from the top. Once the key …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos