Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Great Wall
  4. : Great Wall H6

Great Wall Great Wall H6 - Videoguide

Great Wall Great Wall H6 (2011-2016 / MK 1)
How to replace the cabin filter in the Great Wall H6?

In this tutorial we can see how to replace the cabin filter in the Great Wall H6, an extremely simple and quick operation. First of all, go inside the cabin, …read all…
Posted on 27 March 2024 by ScegliAuto
Great Wall Great Wall H6 (2011-2016 / MK 1)
Can a ramp be made to lift a Great Wall vehicle?

Each of us has had the need in our life, at least once, to lift our car for an inspection or to do some work, etc. Whether it's a Great Wall car or any other …read all…
Posted on 27 March 2024 by ScegliAuto
Great Wall Great Wall H6 (2011-2016 / MK 1)
How to install the sliding cover on the rear tub of a Great Wall pick-up truck

In this video we see how to install the sliding partition on the rear bed of a Great Wall pick-up truck. We will need to prepare the drainage with rubber …read all…
Posted on 25 March 2024 by ScegliAuto
Great Wall Great Wall H6 (2011-2016 / MK 1)
How to perform a reset of the Great Wall H6

Performing a forced reset on a 2021 Great Wall H6 is a very simple operation that can be done independently, thanks also to the help of this short video …read all…
Posted on 20 February 2024 by ScegliAuto
Great Wall Great Wall H6 (2011-2016 / MK 1)
How do you replace the battery of the Great Wall H6 remote control?

In order to replace the battery of the Great Wall H6 remote control, you need to press the button located on the back of the device, so that it is possible to …read all…
Posted on 4 February 2024 by ScegliAuto
Bodywork (1) Key (1) Checks and maintenance (2) Cabin air filter (1)

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos