Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Roller Cover on the Rear Bed of a Great Wall Pickup

Model: Great Wall Great Wall H6 MK 1 - Years 2011-2016
Part: Body

In this video, see how to install the roller cover on the rear bed of a Great Wall pickup. Prepare the drainage with rubber tubes that will exit from the rear lights. As shown in the video, drill holes for the drainage points, two at the front of the bed and two at each corner at the back. Paint all the holes to prevent rust, then insert the drainage rubber tubes into the holes, which will exit in front of the rear lights, as shown. Then you can refit the lights. Prepare the equipment. Assemble the Roller Cover by inserting the rail onto the container cover and the appropriate cover, insert the rubber seal and then the captive nuts. At this point, insert the Roller Cover onto the bed, insert the captive nuts and tighten them (three on each side), and under each one, a bracket must be positioned, which we will tighten well. Then, place a batten to accurately measure the stop of the slide. Tighten all the fasteners; we are almost finished. Next is the installation of the rear sport bar. If you want to purchase the cover, you can find it on bodyline.com.au in the collection/gwm/cannon page. There are various models ranging from £1,500 to £2,000 (+ shipping costs).

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote battery on the Great Wall H6?
Great Wall Great Wall H6 (2011-2016 / MK 1) To replace the remote battery on the Great Wall H6, press the button located on the back of the device to extract the key from the top. Once the key …
How to Replace the Cabin Filter in the Great Wall H6?
How to Replace the Cabin Filter in the Great Wall H6?
Great Wall Great Wall H6 (2011-2016 / MK 1) In this tutorial, you will see how to replace the cabin filter in the Great Wall H6, a very simple and quick operation. First, go inside the cabin, t…
How to reset the service light on the Great Wall
How to reset the service light on the Great Wall
Great Wall Great Wall H6 (2020-2026 / MK 3) Today we will explain how to reset the service light on a Great Wall vehicle. To reset the light, we need to turn on the instrument panel and connect…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos