Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Tarpaulin on the Great Wall Steed

Model: Great Wall Steed MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

Video tutorial

In this video, you will learn how to fit the tarpaulin on the Great Wall Steed. Use a tape measure to take a fixed measurement of 4 inches around the vehicle, marking it with chalk.

Make small holes in the bodywork at the marked points, using a template for guidance. Now, pass the tarpaulin's closure straps through the holes to secure the tarpaulin to the bodywork, preventing it from flapping while driving.

Unfortunately, the vehicle is not designed for this use, so the only solution is to drill the bodywork to pass the closure straps.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

How to find the body color code on the Great Wall Steed.
How to find the body color code on the Great Wall Steed.
Great Wall Steed (2006-2023 / MK 1) In this video, we will see how to find the color code on the Great Wall Steed: an interesting thing we can say about this vehicle is that it is also …
Removing the Door Panel of the Great Wall H6
Removing the Door Panel of the Great Wall H6
Great Wall Steed (2006-2023 / MK 1) Removing the door panel of the Great Wall H6? Remove the front panel of the car following the guide. Remove the cover of the handle located inside. U…
How to Reset the Service Light on a Greatwall Steed?
How to Reset the Service Light on a Greatwall Steed?
Great Wall Steed (2006-2023 / MK 1) To reset the Service light on a Greatwall Steed, press and hold the button located on the instrument panel, which is used to reset the trip meter. Ke…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos