Do it yourself
Frequently asked questions about cars and motorcycles

Dismantling and Replacing the External Door Handle on the Volkswagen Jetta

Model: Volkswagen Jetta - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Handle

See other generations:
Video tutorial

Here are the instructions necessary to dismantle and replace the external door handle on the front door of the Volkswagen Jetta. First, open the front door of the vehicle and start removing the side cover to access the handle hole; unscrew the screw found inside to remove the lock cylinder and then the external handle, as shown in the video.

At this point, carry out the repair or replacement, then reassemble the handle and the lock cylinder; finally, reattach the side cover.


Posted on 17 November 2026 by ScegliAuto


Related tutorials

Volkswagen Jetta (2010-2018 / MK 6, A6) Replace the damaged handle on a Volkswagen Jetta. Open the car door and remove the hole cover caps on the side of the door. Unlock the latch on the s…
Volkswagen Jetta (2005-2010 / MK 5, A5) In this tutorial we can see how to replace the external rear handle on the Volkswagen Jetta, an extremely simple and quick operation. First of all, w…
Volkswagen Jetta (2005-2010 / MK 5, A5) Need to remove the damaged handle on a Volkswagen Jetta? Here’s how to do it from inside the door. Open the car door and remove the hole cover caps o…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos