Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Reinstallation of the Right Front Handle on a Volkswagen Jetta MK6

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Handle

See other generations:
Video tutorial

To remove the front handle of the Jetta MK6, start by removing the plastic cover on the door. You can find the new handle on eBay with the code 406929289869 for £17.50, with free delivery.

Using a Torx T15 screwdriver, loosen the fixing screw (while pulling the handle). Remove the locking mechanism and slide the handle out. Disconnect the cable: using a flat screwdriver, lift the black clip and pull the cable.

For reassembly, reconnect the cable (pressing until it clicks). Insert the handle, mount the locking mechanism, and tighten the T15 screw (the handle will lock itself).

Refit the cover.


Posted on 31 August 2026 by ScegliAuto


Related tutorials

How to Remove the External Handle of the Rear Door of the Volkswagen Jetta?
How to Remove the External Handle of the Rear Door of the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) To remove the external handle of the Volkswagen Jetta, open the door for easier access. You will need to insert a flathead screwdriver into the circu…
How to Remove the Front Door Handle on a Volkswagen Jetta?
How to Remove the Front Door Handle on a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In this tutorial, you will learn how to remove the front door handle on a Volkswagen Jetta, a very simple and quick operation. First, open the door y…
Removing the Handle on a VW Jetta
Removing the Handle on a VW Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Is the door handle damaged? Here’s how to remove the handle from the door of a Volkswagen Jetta. Remove the cover cap from the hole. Insert a suitabl…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos