Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Good morning, today we will tackle the replacement of the spark plug on our Harley Davidson Sportster 883. Let's start by disassembling and removing the side parts of the motorcycle. Once this is done, we will need to disconnect the cable that connects the spark plug to the coil, pulling it carefully. Using the appropriate wrench, we will need to unscrew the spark plug from the cylinder head. Once this step is completed, the spark plug can be removed. Before installing the new spark plug, make sure it is the correct size and free of defects. To install it, follow these same steps in reverse order. By doing so, we will successfully complete the replacement.

Posted on 25 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear shock absorber of the Harley Davidson Sportster Iron 883?
How do you replace the rear shock absorber of the Harley Davidson Sportster Iron 883?
Sportster Iron 883 To replace the rear shock absorber of the Harley Davidson Sportster Iron 883, you need to loosen the screws that secure the component to its housing,…
How to Replace the Clutch Cable on a Harley Davidson Sportster 883
How to Replace the Clutch Cable on a Harley Davidson Sportster 883
Sportster Iron 883 Let’s briefly go over the instructions that will allow you to dismantle and replace the clutch cable on the Harley Davidson Sportster 883. First, pla…
How to replace the rear suspensions of the Harley Davidson Sportster Iron 883
How to replace the rear suspensions of the Harley Davidson Sportster Iron 883
Sportster Iron 883 These short and simple instructions will show us how to disassemble and replace the rear suspensions of the Harley Davidson Sportster Iron 883 motorc…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos