Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the rear brake pads on the Harley Davidson Dyna, you need to loosen the screws that secure the brake caliper to the corresponding disc, so that it can be completely detached from its housing. Once these pads have been removed, you can insert the new ones into the caliper. At this point, you will need to secure the caliper to the disc, so that it can be fastened with the appropriate screws; at the end of the installation, you will need to verify that the brake works correctly even after the replacement has taken place.

Posted on 4 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on a Harley Davidson Dyna
How to Replace the Rear Brake Pads on a Harley Davidson Dyna
Dyna Today's guide will show you how to remove and replace the rear brake pads on a Harley Davidson Dyna. First, place the motorcycle on a stand and begin…
Replacing the Front Brake Pads of the Harley Davidson Dyna
Replacing the Front Brake Pads of the Harley Davidson Dyna
Dyna Today, let's discover the main instructions on how to remove and replace the front brake pads of the Harley Davidson Dyna motorcycle. First, place th…
How do you replace the brake pads on the Harley Davidson Dyna?
How do you replace the brake pads on the Harley Davidson Dyna?
Dyna In order to replace the brake pads of the Harley Davidson Dyna, you need to loosen the screws that hold the brake calipers to the appropriate discs, …

How to reset the oil light on the Honda SH 125

If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete.

Watch the video!


by ScegliAuto

More videos