Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil of a Harley Davidson Road Glide?

Model: Harley Davidson Road Glide
Part: Engine oil

Video tutorial

To change the engine oil of a Harley Davidson Road Glide, start by positioning the motorcycle on a central or side stand to make it stable. Slightly heat the engine to facilitate the drainage of the oil. Locate the oil drain plug on the oil pan under the motorcycle and place a container to collect the used oil underneath it. Remove the drain plug and let the used oil drain completely.

Remove the oil filter with a suitable wrench and make sure to clean the surrounding area well. Lubricate the new oil filter with clean oil before installing it. Close the oil pan drain plug and tighten it properly.

Add the new oil through the oil filler opening, following the owner's manual specifications for type and quantity. Make sure to check the oil level with the dipstick and add oil if necessary.

Start the engine and check for leaks. Finally, clean any oil residues and close the oil cap.


Posted on 31 December 2024 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Harley Davidson Road Glide?
How to Change the Engine Oil on a Harley Davidson Road Glide?
Road Glide To replace the engine oil on a Harley Davidson Road Glide, you need to completely remove the protective panel located at the central lower part of th…
How to Change the Engine Oil in a Harley-Davidson Road Glide?
How to Change the Engine Oil in a Harley-Davidson Road Glide?
Road Glide This tutorial shows how to change the engine oil in a Harley-Davidson Road Glide, a very simple and quick operation. First, wait until the engine is …
How to Change the Engine Oil in the Harley-Davidson Road Glide Special?
How to Change the Engine Oil in the Harley-Davidson Road Glide Special?
Road Glide In this tutorial, you will see how to change the engine oil in the Harley-Davidson Road Glide Special, a very simple and quick operation. First, ensu…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos