Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine oil of the Harley Davidson Dyna?

Model: Harley Davidson Dyna
Part: Engine oil

Video tutorial

In order to replace the motor oil of the Harley Davidson Dyna, you need to loosen the drain plug of the motorcycle's tank, which will be located on the bottom of the vehicle: this way you will be able to proceed by letting the used oil flow into a properly positioned container.

Once the oil has drained, you will also need to remove the oil filter located in this position: once the filter is removed, you can insert the new one, so that you can then top up the oil. This will be done by inserting the oil through the appropriate vent on the right side of the motorcycle.


Posted on 30 January 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a Harley Davidson Dyna
How to Change the Engine Oil and Oil Filter on a Harley Davidson Dyna
Dyna Follow this procedure to perform routine maintenance by changing the engine oil and oil filter on a Harley Davidson Dyna. First, place the motorcycle…
How to Change the Engine Oil on the Harley Davidson Dyna?
How to Change the Engine Oil on the Harley Davidson Dyna?
Dyna You can change the engine oil on the Harley Davidson Dyna by loosening the drain plug located at the bottom centre of the oil sump: once the plug is …
How to Change the Transmission Oil of the Harley Davidson Dyna
How to Change the Transmission Oil of the Harley Davidson Dyna
Dyna The procedure for changing the transmission oil should be carried out regularly to ensure the proper functioning of the engine; let’s see how to do i…

How to Replace the Battery in a Kawasaki Ninja 250?

In this tutorial, you will learn how to replace the battery in a Kawasaki Ninja 250, a very simple and quick operation. First, ensure that the key is not inserted, then remove the passenger seat, unscrew the indicated screws, and take off the two side panels. Next, unscrew the additional bolts indicated, remove the rider's seat, and starting from the negative terminal, disconnect both battery terminals. At this point, unclip the upper securing strap, remove the battery, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos