Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on a Harley Davidson Dyna

Model: Harley Davidson Dyna
Part: Engine oil

Video tutorial

Follow this procedure to perform routine maintenance by changing the engine oil and oil filter on a Harley Davidson Dyna. First, place the motorcycle on its stand and begin unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge, replacing it with a new one and tightening it gently, as shown in the video.

At this point, top up with new engine oil, pouring the correct amount of oil!


Updated on 14 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Harley Davidson Dyna?
How to Change the Engine Oil on the Harley Davidson Dyna?
Dyna You can change the engine oil on the Harley Davidson Dyna by loosening the drain plug located at the bottom centre of the oil sump: once the plug is …
How to Change the Engine Oil on a Harley Davidson Dyna
How to Change the Engine Oil on a Harley Davidson Dyna
Dyna Before starting, position your Harley Davidson Dyna upright using a motorcycle stand. Then, run the engine for a few minutes to facilitate the oil dr…
How do you replace the engine oil of the Harley Davidson Dyna?
How do you replace the engine oil of the Harley Davidson Dyna?
Dyna In order to replace the motor oil of the Harley Davidson Dyna, you need to loosen the drain plug of the motorcycle's tank, which will be located on t…

How to Replace the Battery in a Kawasaki Ninja 250?

In this tutorial, you will learn how to replace the battery in a Kawasaki Ninja 250, a very simple and quick operation. First, ensure that the key is not inserted, then remove the passenger seat, unscrew the indicated screws, and take off the two side panels. Next, unscrew the additional bolts indicated, remove the rider's seat, and starting from the negative terminal, disconnect both battery terminals. At this point, unclip the upper securing strap, remove the battery, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos