Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the motor oil in the Harley-Davidson Road King Classic?

Model: Harley Davidson Road King
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Harley-Davidson Road King Classic, an extremely simple and quick operation. First of all, make sure that the engine is cold enough, then place a container under the motorcycle, locate the drain hole bolt and unscrew it using a 16mm socket wrench.

Let all the oil in the system come out, then unscrew the old filter and tighten both the replacement and the bolt. At this point, all that remains is to pour the new oil through the appropriate hole.


Posted on 13 April 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a Harley Davidson Road King
How to Change the Engine Oil and Oil Filter on a Harley Davidson Road King
Road King Today, discover the steps to replace the engine oil and oil filter, performing the routine maintenance service on a Harley Davidson Road King. First,…
How do you replace the motor oil of the Harley Davidson Road King?
How do you replace the motor oil of the Harley Davidson Road King?
Road King To replace the motor oil of the Harley Davidson Road King, you will need to loosen the drain plug of the oil tank: this plug will be located in the c…
How to Change the Engine Oil in a Harley-Davidson Road King?
How to Change the Engine Oil in a Harley-Davidson Road King?
Road King In this tutorial, you will see how to change the engine oil in a Harley-Davidson Road King, a very simple and quick operation. First, wait until the …

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos