Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's video tutorial will show us the process of replacing the engine coolant of the Harley Davidson Electra Glide motorcycle. First, we put the motorcycle on the stand and start unscrewing the cap of the coolant reservoir; then we unscrew the screws of the plastic cover found under the engine, disconnecting the antifreeze pipe and draining the fluid into a container, as shown in the video. At this point, we proceed to top up with the new coolant, filling it up to the maximum level mark!

Posted on 1 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Starter Motor on Harley Davidson Electra Glide
Replacing the Starter Motor on Harley Davidson Electra Glide
Electra Glide This video shows the steps to remove and replace the starter motor on a Harley Davidson Electra Glide. First, disconnect the battery. Next, unplug th…
How to Remove the Front Fender from a Harley Davidson Electra Glide
How to Remove the Front Fender from a Harley Davidson Electra Glide
Electra Glide Before starting, position your Harley Davidson Electra Glide vertically, and if possible, lift it to work more comfortably on the front fender. Begin…
How to Replace the Starter Motor on a Harley Davidson Electra Glide
How to Replace the Starter Motor on a Harley Davidson Electra Glide
Electra Glide Today, you will see the instructions that will allow you to remove and replace the starter motor on a Harley Davidson Electra Glide motorcycle. First…

How to Change the Engine Oil in the Harley-Davidson Iron 883?

In this tutorial, you will learn how to change the engine oil in the Harley-Davidson Iron 883, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down, then open the filler cap located on the upper right side, disconnect the drain hose, and remove the plug by loosening the corresponding metal clamp. Once all the oil has drained from the system, replace the plug and proceed with changing the filter, which is located on the front of the engine. Finally, add new oil through the filler hole.

Watch the video!


by ScegliAuto

More videos