Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the muffler of the Harley Davidson Electra Glide, you need to loosen the screws that hold the exhaust terminal to its housing, near the rear wheel. To remove it, you will need to perform the same operation on both sides: first, unscrew the screws that hold the muffler supports, then proceed with the removal of the clamp connecting the muffler to the collector. At this point, you can insert the new replacement piece, fixing it to the collector and the appropriate supports.

Posted on 8 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Fender from a Harley Davidson Electra Glide
How to Remove the Front Fender from a Harley Davidson Electra Glide
Electra Glide Before starting, position your Harley Davidson Electra Glide vertically, and if possible, lift it to work more comfortably on the front fender. Begin…
How to Replace the Starter Motor on a Harley Davidson Electra Glide
How to Replace the Starter Motor on a Harley Davidson Electra Glide
Electra Glide Today, you will see the instructions that will allow you to remove and replace the starter motor on a Harley Davidson Electra Glide motorcycle. First…
How do you replace the motor oil of the Harley Davidson Electra Glide?
How do you replace the motor oil of the Harley Davidson Electra Glide?
Electra Glide The procedure for replacing the motor oil in the Harley Davidson Electra Glide involves loosening the drain plug of the oil pan located in the centra…

Guide to replacing the starter motor of the Piaggio Vespa ET4 150

Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the scooter on the center stand and lift the seat; we remove the battery, disconnecting both terminals, and then remove the compartment under the seat, as shown in the video. At this point, we disconnect the intake hose to access the starter motor, unscrewing its fastening screws and disconnecting the wiring to remove it; all that's left is to replace it with the new original one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos