Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front brake pads of the Harley Davidson Road King?

Model: Harley Davidson Road King
Part: Brake pads

Video tutorial

The replacement of the front brake pads on the Harley Davidson Road King can be removed by loosening the two screws that fix the caliper to the disc, located at the top and bottom of the caliper itself. By removing these screws, the caliper can be removed and the pads inside it will be extracted.

After removal, the new replacement parts can be inserted inside the caliper and the caliper can be positioned on the appropriate disc. It must be locked by screwing the screws in the bottom and top of the caliper, checking that the brake works.


Posted on 28 October 2025 by ScegliAuto


Related tutorials

How do you replace the brake pads on the Harley Davidson Road King?
How do you replace the brake pads on the Harley Davidson Road King?
Road King To replace the brake pads on the Harley Davidson Road King, the same procedure must be followed for both the front and rear wheels: you will need to …
How to Replace the Front Brake Pads on a Harley Davidson Road King?
How to Replace the Front Brake Pads on a Harley Davidson Road King?
Road King You can replace the front brake pads on a Harley Davidson Road King by loosening the screws that secure the brake caliper to the corresponding brake …
How to Replace the Rear Brake Pads on the Harley Davidson Road King?
How to Replace the Rear Brake Pads on the Harley Davidson Road King?
Road King To replace the rear brake pads on the Harley Davidson Road King, you need to loosen the screws that secure the rear brake caliper to its housing: thi…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos