Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Harley Davidson Road King?

Model: Harley Davidson Road King
Part: Brake pads

Video tutorial

You can replace the front brake pads on a Harley Davidson Road King by loosening the screws that secure the brake caliper to the corresponding brake disc: once the caliper is released, you will need to remove the pin that holds the pads in their housing to slide out the old pads.

At this point, insert the new pads into the caliper and reposition it onto the disc: secure it with the corresponding screws and then check that everything is functioning correctly.


Posted on 14 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Harley Davidson Road King?
How to Replace the Front Brake Pads on a Harley Davidson Road King?
Road King To replace the front brake pads on a Harley Davidson Road King, loosen the bolts securing the caliper to the corresponding disc so that you can compl…
How to replace the front brake pads on a Harley Davidson Road King?
How to replace the front brake pads on a Harley Davidson Road King?
Road King To replace the front brake pads on a Harley Davidson Road King, loosen the two screws that secure the caliper to the respective disc, located at the …
How to Replace the Rear Brake Pads on the Harley Davidson Road King?
How to Replace the Rear Brake Pads on the Harley Davidson Road King?
Road King To replace the rear brake pads on the Harley Davidson Road King, you need to loosen the screws that secure the rear brake caliper to its housing: thi…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos