Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Harley Davidson Road King?

Model: Harley Davidson Road King
Part: Brake pads

Video tutorial

To replace the front brake pads on a Harley Davidson Road King, loosen the bolts securing the caliper to the corresponding disc so that you can completely detach it. Once the old caliper is removed, proceed to slide out the pads located inside. This will allow you to insert the new pads and secure them using the corresponding pin. When the new pads are in place, fix them with the appropriate bolts, ensuring everything is functioning correctly.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Harley Davidson Road King?
How to Replace the Front Brake Pads on a Harley Davidson Road King?
Road King You can replace the front brake pads on a Harley Davidson Road King by loosening the screws that secure the brake caliper to the corresponding brake …
How to replace the front brake pads on a Harley Davidson Road King?
How to replace the front brake pads on a Harley Davidson Road King?
Road King To replace the front brake pads on a Harley Davidson Road King, loosen the two screws that secure the caliper to the respective disc, located at the …
How do you replace the front brake pads of the Harley Davidson Road King?
How do you replace the front brake pads of the Harley Davidson Road King?
Road King The replacement of the front brake pads on the Harley Davidson Road King can be removed by loosening the two screws that fix the caliper to the disc,…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos