Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on the Harley-Davidson Street Glide?

Model: Harley Davidson Street Glide
Part: Headlight

Video tutorial

This tutorial demonstrates how to replace the front headlight on the Harley-Davidson Street Glide, a very simple and quick operation. First, ensure the instrument panel is off for safety.

Then, locate the screw on the bottom side of the headlamp and unscrew it using a cross-head screwdriver. Next, remove the outer ring, unscrew the additional screws just released, and separate the headlight from the base.

Now, disconnect the power connector, attach the replacement, and reassemble everything in reverse order.


Posted on 22 August 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Harley Davidson Street Glide
How to Replace the Air Filter on the Harley Davidson Street Glide
Street Glide .. To replace the air filter on the Harley Davidson Street Glide, loosen the screws securing the air filter to its housing located on the right.. …
How to Replace the Front Headlight on the Harley-Davidson Street Glide?
How to Replace the Front Headlight on the Harley-Davidson Street Glide?
Street Glide .. In this tutorial, see how to replace the front headlight on the Harley-Davidson Street Glide, a very simple and quick operation... …
How do you replace the rear shock absorber of the Harley Davidson Street Glide?
How do you replace the rear shock absorber of the Harley Davidson Street Glide?
Street Glide .. To replace the rear shock absorber of the Harley Davidson Street Glide, you need to loosen the screws that hold it to its housing: this can be found on.. …

How to Replace the Final Drive Oil of the Moto Guzzi Nevada 750

Today, we will go through the main steps for replacing the final drive oil of the Moto Guzzi Nevada 750. First, place the motorcycle on the centre stand and start unscrewing the final drive oil plug located under the transmission, allowing it to drain into a container for about ten minutes; then unscrew the filler cap to let the oil flow out more quickly. At this point, top up with the new transmission oil of the correct type (as indicated in the owner's manual), pouring the right amount of oil and finally securing the filler cap!

Watch the video!


by ScegliAuto

More videos