Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake and Clutch Levers on the Harley Davidson V-Rod

Model: Harley Davidson V Rod
Part:

Video tutorial

This guide will show you the steps to remove and replace the brake and clutch levers on the Harley Davidson V-Rod motorcycle. First, place the motorcycle on a stand and start by removing the front brake lever; to do this, unscrew the pivot bolt while holding the lower nut in place, as shown in the video.

Next, unscrew the clutch lever bolt, disconnecting the steel cable to remove it as well; install the new clutch lever and adjust the disengagement using the adjuster, finally adjusting the travel of the front brake lever.


Posted on 21 September 2026 by ScegliAuto


Related tutorials

How do you replace the clutch of the Harley Davidson V Rod?
How do you replace the clutch of the Harley Davidson V Rod?
V Rod In order to replace the clutch of the Harley Davidson V Rod, you must first loosen the screws that secure the side protection panel of the motorcycle…
How to Bleed the Cooling System and Replace the Radiator Fluid on a Harley Davidson V-Rod
How to Bleed the Cooling System and Replace the Radiator Fluid on a Harley Davidson V-Rod
V Rod In today's video, you will learn how to bleed the cooling system and replace the radiator fluid on a Harley Davidson V-Rod in simple and quick steps.…
How to Replace the Spark Plugs of the Harley Davidson V Rod?
How to Replace the Spark Plugs of the Harley Davidson V Rod?
V Rod In this guide, you will find instructions on how to remove and replace the spark plugs of the Harley Davidson V Rod. First, place the motorcycle on a…

How to Replace the Headlight Bulb of a Triumph Speed Twin?

To replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight unit in place: these screws will be located at the bottom right and bottom left of the headlight unit. Once these are loosened, you can proceed to pull the headlight from its housing and disconnect the connectors inside: the corresponding bulb can now be extracted from inside the headlight unit, allowing you to insert the new one, remounting all the parts you just removed.

Watch the video!


by ScegliAuto

More videos