Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the clutch of the Harley Davidson V Rod?

Model: Harley Davidson V Rod
Part: Clutch

Video tutorial

In order to replace the clutch of the Harley Davidson V Rod, you must first loosen the screws that secure the side protection panel of the motorcycle. Once this panel has been freed from its position, you can proceed by locating the clutch discs underneath.

These must be removed from their position by loosening the screws that secure them and disconnecting the chain around them; in this way, you can insert the new discs that make up the clutch and then reattach the chain. After the installation, you can verify that everything is functioning properly.


Posted on 16 March 2025 by ScegliAuto


Related tutorials

How to Replace the Brake and Clutch Levers on the Harley Davidson V-Rod
How to Replace the Brake and Clutch Levers on the Harley Davidson V-Rod
V Rod This guide will show you the steps to remove and replace the brake and clutch levers on the Harley Davidson V-Rod motorcycle. First, place the motorc…
How to Bleed the Cooling System and Replace the Radiator Fluid on a Harley Davidson V-Rod
How to Bleed the Cooling System and Replace the Radiator Fluid on a Harley Davidson V-Rod
V Rod In today's video, you will learn how to bleed the cooling system and replace the radiator fluid on a Harley Davidson V-Rod in simple and quick steps.…
How to Replace the Spark Plugs of the Harley Davidson V Rod?
How to Replace the Spark Plugs of the Harley Davidson V Rod?
V Rod In this guide, you will find instructions on how to remove and replace the spark plugs of the Harley Davidson V Rod. First, place the motorcycle on a…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos