Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Is your Harley not starting anymore and do you need to change the ignition switch? Perfect! Disconnect the battery, remove the ignition switch by unscrewing the front ring and push the central piece towards the bike to slide it out from behind. Disconnect the connectors, remembering exactly how they are positioned (you might want to take photos). There are simply three screws to unscrew. Take the new ignition switch and connect the connectors, replace the three screws, and insert the switch back in place. Screw the front ring back on and reconnect the battery. Try to start it, ensuring everything has been done correctly; otherwise, a fuse may have been damaged.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight on the Harley-Davidson Sportster Iron 883?
How to replace the front headlight on the Harley-Davidson Sportster Iron 883?
Sportster Iron 883 In this tutorial we can see how to replace the front headlight on the Harley-Davidson Sportster Iron 883, an extremely simple and quick operation. Fi…
Replacing the Battery on Harley Davidson Sportster Iron 883
Replacing the Battery on Harley Davidson Sportster Iron 883
Sportster Iron 883 To access the battery on the Harley Davidson Sportster Iron 883, first remove the left side fairing shown in the video, followed by the seat (unscrew…
How do you replace the exhaust on the Harley Davidson Sportster Iron 883?
How do you replace the exhaust on the Harley Davidson Sportster Iron 883?
Sportster Iron 883 To replace the exhaust of the Harley Davidson Sportster Iron 883, you need to loosen the screws that secure the muffler to its housing, so that it ca…

How to Change the Engine Oil in the Yamaha FZ V 2.0?

As shown in this tutorial, changing the engine oil in the Yamaha FZ V 2.0 is an extremely simple and quick task. First, ensure the engine is completely cold, then position a container underneath and, using a 17mm spanner, loosen the drain plug. Once all the oil has drained from the system, proceed by opening the filter housing with an 8mm socket and replacing the filter. Finally, reassemble everything and add new oil through the upper fill hole.

Watch the video!


by ScegliAuto

More videos