Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Headlamp on a Harley Davidson Sportster Iron 883

Model: Harley Davidson Sportster Iron 883
Part: Headlight

Video tutorial

Unscrew the screw directly beneath the headlamp, remove the ring, and the headlamp will come out of its housing. To remove it, simply disconnect the connectors (if you are fitting an LED headlamp, connect only the central black connector, leaving the other free in the headlamp).

To detach the central black connector, press the two side locking screws. Pass the wires through the ring and connect the cables to the new headlamp.

If you do not remember the correct combinations for the headlamps, start the bike to see if it works. Position the ring around the headlamp, ensuring the teeth fit together.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to replace the front headlight on a Harley-Davidson Sportster Iron 883?
How to replace the front headlight on a Harley-Davidson Sportster Iron 883?
Sportster Iron 883 This tutorial shows how to replace the front headlight on a Harley-Davidson Sportster Iron 883, a very simple and quick operation. First, ensure that…
How to Replace the Headlight on a Harley-Davidson Sportster Iron 883?
How to Replace the Headlight on a Harley-Davidson Sportster Iron 883?
Sportster Iron 883 In this tutorial, we will see how to replace the headlight on a Harley-Davidson Sportster Iron 883, an extremely simple and quick operation. First, e…
How to replace the rear suspensions of the Harley Davidson Sportster Iron 883
How to replace the rear suspensions of the Harley Davidson Sportster Iron 883
Sportster Iron 883 These short and simple instructions will show us how to disassemble and replace the rear suspensions of the Harley Davidson Sportster Iron 883 motorc…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos