Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the oil of the primary chain, you must first unscrew the screw (with a 1/4 Allen key) located under the shiny cover. Collect the used oil in a container. While it drains, use a 5/32 Allen key to remove the covers. Now, with a screwdriver, unscrew the central pin that is now free: this screw holds the clutch adjustment. Check that the chain has a play of about 1 cm (5 mm down and 5 mm up). If the chain is not properly adjusted, adjust it with the screw located below the pin just unscrewed. Reassemble everything and fill with new oil.

Updated on 9 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Clutch on a Harley Davidson Sportster
How to Replace the Clutch on a Harley Davidson Sportster
Sportster To replace the clutch on a Harley Davidson Sportster, unscrew the screws securing the cover on the left side of the bike. Once the screws are loosene…
How to replace the clutch on a Harley Davidson Sportster?
How to replace the clutch on a Harley Davidson Sportster?
Sportster On the Harley Davidson Sportster, to replace the clutch, unscrew the screws securing the protective cover on the left side of the vehicle. Once the s…
How do you replace the transmission of the Harley Davidson Sportster?
How do you replace the transmission of the Harley Davidson Sportster?
Sportster In order to replace the transmission of the Harley Davidson Sportster, you need to loosen the screws that secure the transmission case located on the…

How to Replace the Air Filter on a Harley Davidson Dyna?

To replace the air filter on a Harley Davidson Dyna, loosen the screws securing the cover located on the right side of the bike, just below the fuel tank. Once the cover is removed, you will locate the filter underneath: it must be removed from its housing by unscrewing the fastening screws and sliding it out from its compartment. After the old filter has been removed, position the new replacement part, securing it in place with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos