Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the clutch on a Harley Davidson Sportster, unscrew the screws securing the cover on the left side of the bike. Once the screws are loosened, remove the cover to access the underlying components: unscrew the screws holding the clutch, removing it from its housing and freeing it from its chain. This will allow you to insert a new replacement part, securing it properly with the screws removed earlier, and reattach the protective cover.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the clutch lever on a Harley Davidson Sportster?
How to replace the clutch lever on a Harley Davidson Sportster?
Sportster To replace the clutch lever on a Harley Davidson Sportster, first loosen the nuts on the cable to increase slack on the clutch lever. For more space,…
How to Replace the Clutch on a Harley Davidson Sportster
How to Replace the Clutch on a Harley Davidson Sportster
Sportster Today, let’s look at the guide to remove and replace the clutch discs on a Harley Davidson Sportster motorcycle. First, place the bike on a stand and…
How to replace the clutch on a Harley Davidson Sportster?
How to replace the clutch on a Harley Davidson Sportster?
Sportster On the Harley Davidson Sportster, to replace the clutch, unscrew the screws securing the protective cover on the left side of the vehicle. Once the s…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos