Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The first step when installing the battery is to connect the positive terminal: insert the battery eyelet into the screw, and if the screw is too long for the battery purchased, add washers (see video). Repeat the same process for the negative terminal. Tighten both screws well. At this point, you can check that the bike's lights turn on, indicating that the battery is functioning. Place the battery in its position. Secure the motorcycle's battery charger connector, for example, in the fuse box: this way, it will be easily accessible if needed.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear suspensions of the Harley Davidson Sportster Iron 883
How to replace the rear suspensions of the Harley Davidson Sportster Iron 883
Sportster Iron 883 These short and simple instructions will show us how to disassemble and replace the rear suspensions of the Harley Davidson Sportster Iron 883 motorc…
How to Replace the Battery in a Harley-Davidson Sportster Iron 883?
How to Replace the Battery in a Harley-Davidson Sportster Iron 883?
Sportster Iron 883 In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceedi…
How to Replace the Rear Brake Pads on a Harley Davidson Sportster Iron 883?
How to Replace the Rear Brake Pads on a Harley Davidson Sportster Iron 883?
Sportster Iron 883 To replace the rear brake pads on the Harley Davidson Sportster Iron 883, loosen the screws securing the rear brake caliper, located immediately next…

How to Change the Engine Oil in the Yamaha FZ V 2.0?

As shown in this tutorial, changing the engine oil in the Yamaha FZ V 2.0 is an extremely simple and quick task. First, ensure the engine is completely cold, then position a container underneath and, using a 17mm spanner, loosen the drain plug. Once all the oil has drained from the system, proceed by opening the filter housing with an 8mm socket and replacing the filter. Finally, reassemble everything and add new oil through the upper fill hole.

Watch the video!


by ScegliAuto

More videos