Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Harley Davidson Touring

Model: Harley Davidson Touring
Part: Brake pads

Video tutorial

In today's video, you will see the instructions to remove and replace the front brake pads on a Harley Davidson Touring motorcycle. First, move to the front of the bike and start unscrewing the bolts securing the brake caliper to remove it from the disc; then, use a lever inside the caliper to retract the piston, as shown in the video.

At this point, remove the old pads and replace them with new ones, cleaning the caliper of dirt; insert the new pads and refit the brake caliper!


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Pads on a Harley Davidson Touring?
How to Replace the Brake Pads on a Harley Davidson Touring?
Touring You can replace the brake pads on a Harley Davidson Touring by loosening the screws that secure the brake caliper to the corresponding disc. Once the…
How to Replace the Rear Brake Pads on a Harley Davidson Touring
How to Replace the Rear Brake Pads on a Harley Davidson Touring
Touring To replace the rear brake pads on a Harley Davidson Touring, open the side pannier to access the internal fastening screws. By loosening these bolts,…
How do you replace the front brake pads on the Harley Davidson Touring?
How do you replace the front brake pads on the Harley Davidson Touring?
Touring In order to replace the front brake pads of the Harley Davidson Touring, you need to loosen the screws that fix the brake caliper to its seat on the …

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos