Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Exhaust on the Harley Davidson Touring

Model: Harley Davidson Touring
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the Harley Davidson Touring, loosen the bolt that secures the clamp, which connects the front part of the exhaust to the rear part of the exhaust pipe. Once this clamp is removed, you can unscrew the bolt that secures the exhaust at its rear end, allowing the piece to be completely free.

Now, you can fully detach the exhaust by removing it from its housing and replacing it with a new one; after replacement, secure the new part properly.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

Touring To replace the exhaust on the Harley Davidson Touring, you need to detach the two panniers located at the rear of the bike: this will allow access to…
Touring To replace the battery installed on the Harley Davidson Touring, you need to loosen the screws that secure the seat to its housing: the screw will be…
Touring To replace the battery on a Harley Davidson Touring, remove all the screws securing the seat, including those accessible by opening the side panniers…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos