Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on the Harley Davidson Ultra?

Model: Harley Davidson Ultra
Part: Clock

Video tutorial

To set the clock on the Harley Davidson Ultra, turn on the instrument panel by rotating the key in the ignition switch. Once the panel is on, press the ON button on the radio and then the button 6. This will bring up a screen on the display, allowing you to adjust the time using the up and down arrows.

Once the clock is set, you can return to the main screen, ensuring that the change has been made.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

Replacing the Starter Motor of the Harley Davidson Ultra Classic
Replacing the Starter Motor of the Harley Davidson Ultra Classic
Ultra In today's video tutorial, we will see how to remove and replace the starter motor of the Harley Davidson Ultra Classic by following these simple ste…
Removing the Rear Wheel on Harley Davidson Ultra
Removing the Rear Wheel on Harley Davidson Ultra
Ultra Today, you will see in this video tutorial how to remove the rear wheel of a Harley Davidson Ultra. Lift and secure your motorcycle, then start by re…
How to Replace the Coolant in a Harley Davidson Ultra
How to Replace the Coolant in a Harley Davidson Ultra
Ultra In this brief and simple guide, you will find instructions to drain and replace the coolant in a Harley Davidson Ultra motorcycle. First, place your …

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos