Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to replace the engine temperature sensor on a Harley-Davidson Touring, a very simple and quick operation. First, wait for the engine to be completely cold to operate safely, then move to the left side of the engine and locate the sensor, which is situated on the rear of the cylinder head. Disconnect the power connector, grasp the sensor with a long socket wrench, and unscrew it. At this point, insert the replacement part, tighten it to the cylinder head, and reconnect the connector.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil of the Harley Davidson M8 Touring?
How to change the engine oil of the Harley Davidson M8 Touring?
Touring To change the engine oil of the Harley Davidson M8 Touring, loosen the drain plug of the oil sump, which is positioned at the bottom of the vehicle: …
How do you replace the battery of the Harley Davidson Touring?
How do you replace the battery of the Harley Davidson Touring?
Touring .. To replace the battery installed on the Harley Davidson Touring, you need to loosen the screws that secure the seat to its housing: the screw will be.. …
How do you replace the front headlight of the Harley Davidson Touring?
How do you replace the front headlight of the Harley Davidson Touring?
Touring .. to replace the front headlight of the Harley Davidson Touring, you need to loosen the screws that secure the headlight assembly inside its housing:.. …

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos