Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Tyre on the Harley Davidson Iron 883

Model: Harley Davidson Iron
Part: Tires

Video tutorial

Below are the instructions for removing and replacing the rear tyre on the Harley Davidson Iron 883. First, place your motorcycle on a stand and lift the rear wheel off the ground. Then, unscrew the central axle of the wheel using a socket wrench with an extension, disconnecting it from the drive belt to remove the wheel.

Next, release the air from the tyre to remove it and replace it with a new one. Refit the rear wheel and adjust the belt, following the video tutorial to the end!


Updated on 14 September 2026 by ScegliAuto


Related tutorials

How to replace the motor oil in the Harley-Davidson Iron 883?
How to replace the motor oil in the Harley-Davidson Iron 883?
Iron In this tutorial we can see how to replace the motor oil in the Harley-Davidson Iron 883, an extremely simple and quick operation. First of all, make…
How to Replace the Battery on Harley Davidson Iron 883
How to Replace the Battery on Harley Davidson Iron 883
Iron Today, we will provide instructions on how to remove and replace the battery of the Harley Davidson Iron 883 in simple steps. First, place the bike o…
How to Replace the Remote Battery on the Harley-Davidson Iron 883?
How to Replace the Remote Battery on the Harley-Davidson Iron 883?
Iron In this tutorial, we will see how to replace the battery in the remote for the Harley-Davidson Iron 883, a very simple and quick operation. For this,…

How to Change the Transmission Oil on a Piaggio Vespa GTS Scooter

In this tutorial, you will see how to change the transmission oil on a Piaggio Vespa GTS scooter, a very simple operation applicable to all engine sizes. First, wait until the engine is completely cold, then position a container underneath the transmission area and, using a 6 mm hex socket spanner, unscrew the drain plug. Allow all the oil contained in the casing to drain out, reinsert the plug, and add the necessary amount of oil through the upper hole. You can use a pump or a syringe to assist with this.

Watch the video!


by ScegliAuto

More videos