Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp on a Harley-Davidson Sportster?

Model: Harley Davidson Sportster
Part: Headlight

Video tutorial

In this tutorial, you will see how to replace the front headlamp on a Harley-Davidson Sportster, an extremely simple and quick operation. First, ensure that the key is not inserted for safety, then move to the front of the headlamp, locate the screw underneath it, and undo it using a standard cross-head screwdriver.

Next, separate the lamp from the base, disconnect the power connector, and if necessary, transfer the bulb to the new unit. Finally, fit the new unit by following the reverse procedure.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp on the Harley Davidson Sportster
How to Replace the Front Headlamp on the Harley Davidson Sportster
Sportster .. how to replace the front headlamp on the Harley Davidson Sportster. First, ensure the headlamp is cold, having been off for a few hours. Gather a screwdriver... …
How to replace the front headlight on a Harley-Davidson Sportster?
How to replace the front headlight on a Harley-Davidson Sportster?
Sportster .. how to replace the front headlight on a Harley-Davidson Sportster, an extremely simple and quick operation. First, ensure that the instrument panel.. …
How to replace the front headlight on the Harley-Davidson Sportster?
How to replace the front headlight on the Harley-Davidson Sportster?
Sportster .. how to replace the front headlight on the Harley-Davidson Sportster, an extremely simple and quick operation. Before proceeding, ensure that the key is.. …

How to Replace the Coolant in the KTM XC 300

Follow this guide on how to replace the coolant in the KTM XC 300 enduro bike, as well as the XC-W 300. First, place your bike on a stand and start by unscrewing the coolant drain screw located at the bottom of the water pump casing, allowing it to drain into a container for about ten minutes; then unscrew the radiator cap as shown in the video. At this point, top up with new coolant suitable for your radiator, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos