Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change on a Holden Barina Spark

Model: Holden Barina Spark MK 1 - Years 2009-2015
Part: Warning light – error code

This video tutorial shows how to reset the oil change on a Holden Barina Spark. First, perform maintenance on the vehicle, including changing the engine oil and filters. After completing the DIY service, get in the car, engage the parking brake, press and hold the START button (without starting the engine, just turn on the instrument panel). When the panel is on, move the switch located on the right control lever, and you will see the message "Oil life" appear on the display, indicating that the oil life is at 0%. Now, move the switch on the control lever up (YES) and confirm with the upper switch on the control lever. Reset complete.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Find the OBD Port on the Holden Barina Spark
How to Find the OBD Port on the Holden Barina Spark
Holden Barina Spark (2009-2015 / MK 1) The Holden Barina Spark is a vehicle that is not imported to Europe. It is a popular car in Australia, and like all cars from that part of the world,…
How to Replace the Coolant Reservoir on the Holden Barina Spark
How to Replace the Coolant Reservoir on the Holden Barina Spark
Holden Barina Spark (2009-2015 / MK 1) In today's tutorial video, you will learn how to remove and replace the coolant reservoir on the Holden Barina Spark. First, open the hood of your ca…
How to Replace the Spark Plugs on the Holden Barina Spark
How to Replace the Spark Plugs on the Holden Barina Spark
Holden Barina Spark (2009-2015 / MK 1) In today's tutorial video, follow the steps to remove and replace the spark plugs on the Holden Barina Spark, as outlined below. First, open the hood…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos