Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Holden Captiva?

Model: Chevrolet Captiva CG - Years 2006-2018
Part: Engine oil

To change the engine oil on a Holden Captiva, access the lower part of the engine compartment to open the oil drain plug: this way, all the oil can be collected in a properly positioned container. Once the oil has completely drained, close the drain plug and open the hood to remove the oil filter from its housing. After the old filter is removed, install the new one and top off the oil through the designated fill cap.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the cabin of the Holden Captiva?
Where is the fuse box located in the cabin of the Holden Captiva?
Chevrolet Captiva (2006-2018 / CG) Thanks to the steps described in this new mini guide aimed at all of you who own a Holden Captiva, you will be able to locate the fuse box in the cab…
Where to Find the Fuse Box of the Holden Captiva
Where to Find the Fuse Box of the Holden Captiva
Chevrolet Captiva (2006-2018 / CG) If you don't know where the fuse box containing all the various fuses of your Holden Captiva is located, don't worry. Just read the following guide c…
How to Replace the Air Filter on a Holden Captiva?
How to Replace the Air Filter on a Holden Captiva?
Chevrolet Captiva (2006-2016 / CG) To replace the air filter on a Holden Captiva, open the hood to access the filter box located on the left side of the engine compartment. Loosen the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos