Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Trax
    4. : How do you change the Holden Trax engine oil?

Chevrolet Trax - Video tutorial

Model: Chevrolet Trax MK 1 - Years 2013-2020
Part: Engine oil
Operation: How do you change the Holden Trax engine oil?

In order to change the Holden Trax engine oil, you have to go to the lower part of the engine compartment, where the engine oil drain plug will be positioned. This must be unscrewed by letting the engine oil flow into a suitably positioned container; when it is completely drained, it will also be necessary to remove the oil filter located next to the tank, replacing it with a new spare part. At the end of these operations, you will have to open the hood so that you can put the new oil inside the filler hole.


Posted on 5 June 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos