Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Trax
    4. : Reset the Holden Trax service light

Chevrolet Trax - Video tutorial

Model: Chevrolet Trax MK 1 - Years 2013-2020
Part: Checks and maintenance
Operation: Reset the Holden Trax service light

Today we will see, in this video tutorial, the instructions necessary to reset the Holden Trax oil change routine maintenance light. First we get in the car and start turning on the instrument panel; then we go to press the button located on the instrument panel until we reach the engine oil warning light, as shown in the video. At this point we are going to press and hold the button until the oil life is reset (the service is confirmed when the value 100 is indicated); then let's turn off the ignition and start the car!


Posted on 24 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos