Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Holden Trax

Model: Chevrolet Trax MK 1 - Years 2013-2020
Part: Warning light – error code

If you have changed the engine oil and filter on this vehicle model yourself, you need to reset the service light that has illuminated on the instrument cluster display. First, turn on the ignition. Then, display the message "Oil Life Remaining" in the Driver Information Center. Press and hold the SET/RESET button on the Driver Information Center for more than 5 seconds (on vehicles without DIC, use the TRIP reset stem for SET/RESET). The oil life will change to "100%" and the job will be complete.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset the Service Light on the Holden Trax
Reset the Service Light on the Holden Trax
Chevrolet Trax (2013-2020 / MK 1) Today, you will learn how to reset the maintenance light for the oil change on the Holden Trax in this video tutorial. First, get inside the vehicle …
How to Reset the Service Light on Holden Trax
How to Reset the Service Light on Holden Trax
Chevrolet Trax (2013-2020 / MK 1) In today's video, you will see how to reset the expired service light on the Holden Trax. This tutorial also applies to other models of similar age. …
How to Change the Engine Oil in a Holden Trax?
How to Change the Engine Oil in a Holden Trax?
Chevrolet Trax (2013-2020 / MK 1) To change the engine oil in the Holden Trax, access the underside of the engine bay where the engine oil drain plug is located. This must be unscrewe…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos