Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on Holden Trax

Model: Chevrolet Trax MK 1 - Years 2013-2020
Part: Warning light – error code

In today's video, you will see how to reset the expired service light on the Holden Trax. This tutorial also applies to other models of similar age. Turn on the ignition and navigate to the menu using the appropriate button on the right turn signal stalk. Now proceed through the menu by rotating the dial until you find the corresponding option. Finally, reset the parameter by pressing the side button of the control, and the operation is complete. As you have seen, it was a quick job that can be done in no time. Remember to perform periodic maintenance.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Chevrolet Trax (2013-2020 / MK 1) Today, you will learn how to reset the maintenance light for the oil change on the Holden Trax in this video tutorial. First, get inside the vehicle …
Chevrolet Trax (2013-2020 / MK 1) To change the engine oil in the Holden Trax, access the underside of the engine bay where the engine oil drain plug is located. This must be unscrewe…
Chevrolet Trax (2013-2020 / MK 1) If you have changed the engine oil and filter on this vehicle model yourself, you need to reset the service light that has illuminated on the instrum…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos