Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulb on a Holden Trax

Model: Chevrolet Trax MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Light bulb

Video tutorial

In today's video, we will show you how to replace the headlight bulb on a Holden Trax. This video also applies to its twin, the Chevrolet Trax, and the procedure is very similar for the Opel Mokka. Always work with the engine off to avoid unpleasant burns.

Start by opening the hood and inserting the prop rod. Remove the dust cover and proceed to extract the burnt bulb by disconnecting the connector and removing the metal clip. At this point, insert the new unit and test its operation.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Holden Trax?
How to Change the Engine Oil in a Holden Trax?
Chevrolet Trax (2013-2020 / MK 1) To change the engine oil in the Holden Trax, access the underside of the engine bay where the engine oil drain plug is located. This must be unscrewe…
How to Remove the Tailgate Panel of the Holden Trax?
How to Remove the Tailgate Panel of the Holden Trax?
Chevrolet Trax (2013-2020 / MK 1) In this tutorial, you will see how to remove the tailgate panel of the Holden Trax, a very simple and quick operation. First, open the trunk. Then, u…
Where to Find the Fuse Box on the Holden Trax
Where to Find the Fuse Box on the Holden Trax
Chevrolet Trax (2013-2020 / MK 1) To address one or more electrical components in your Holden Trax, you need to know the location of the respective fuses. In this guide, we will disco…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos